Pages

Tuesday, March 8, 2011

Installing VMware vShield Edge Manager

While I know installing the VMware vShield Edge Manager isn’t exactly all that exciting, I took the time to document during a deployment in a test lab and what better to way to use some of these screenshots than to write up a blog post.  There isn’t a whole lot to during the install but for those who are interested in knowing what the install looks like, please read on.

Proceed with downloading the VMware vShield Edge Manager from the VMware downloads site as shown in the screenshot below:

image

Once you’ve downloaded the OVA file, open up your vSphere Client, log into vCenter, select File –> Deploy OVF Template…:

image

Browse and select the OVA file you’ve downloaded:

image

Click Next:

image

The details of the OVF summarizing what you’re deploying will be displayed:

image

Agree to the EULA as we always do:

image

Choose a descriptive name for the vShield Manager:

image

Select the host you would like to deploy the vShield Manager on:

image

Choose to either Thick or Thin provision the vShield manager:

image

Review the summary and click finish to begin the deployment:

image

As with any other OVAs, vCenter will begin creating the virtual machine:

image 

image 

image

Once completed, you’ll see a new virtual machine in your cluster:

image

Proceed with powering up the virtual machine and open up the console:

image

The vShield operating system will begin to load:

image

image

image

Believe it or not, it took me awhile to figure out what the what the login credentials were because I missed it in the manual so in case anyone is searching for what the default vShield Manager admin credentials are, it’s:

Login: Admin

Password: default

image

Once you’ve successfully logged in, begin the setup by typing:

enable

setup

image

The wizard will ask you for the following:

  1. IP Address
  2. Subnet Mask
  3. Default gateway
  4. Primary DNS IP
  5. Secondary DNS IP
  6. DNS domain search list

image

Once you’ve completed the wizard, exit the vShield Manager console by typing exit and log back in:

image

You can check to see whether your IP address setting was applied with the following command:

show interface

image

Once you’ve confirmed that the settings you’ve configured during setup has been applied, launch a browser and browse to the vShield Manager’s IP address:

image

Login with the admin/default credentials:

image

Once you’ve successfully logged in, you will be placed in the configuration page:

image

You can navigate around the other pages such as the Updates page:

image

The Users page:

image

The System Events page:

image

The Audit Logs page:

image

To complete the setup, navigate to the configuration page, proceed with entering your vCenter Server information and click on the Save button.  Once you’ve saved the vCenter information, you’ll see the following message:

Changing the vCenter address may result in unpredictable behavior. Please update only if you change IP of your current vCenter Server.

Note:  Please make sure you complete the vCenter information before proceeding to the next step.

image 

Complete the install by registering vShield Manager as a Plug-in in vCenter by clicking on the Register button.  Once you’ve done so, you’ll see the following message:

Plugin is registered successfully

image

You should also confirm that the plugin shows up in the Plug-in Manager of vCenter:

image

Nothing too fancy but this should give you an idea of how simple it is to install and register the vShield Manager.  Configuring it will require much more thought.

8 comments:

Hamish said...

I'm loving your abridged guides Terence. This is the third in three days. One minor detail - you've listed the Admin account with an uppercase A in the text, but used lowercase in the screenshot.

Terence Luk said...

Thanks for the correction Hamish. I'm also happy that my posts have been able to help you.

Dave B said...

Hi Terence,

Just tried this and the admin/default combo aren't working - any ideas?

Vee Eee Technologies said...

I have no words for this great post such a awe-some information i got gathered. Thanks to Author.

Anonymous said...

Great blog!
Now how do you configure vShield edge portion for port group isolation? cant find this anywhere.

Anonymous said...

Blah Blah Blah Lukie

HARIHARASUDHAN SUBRAMANIAN said...

thks. its really helpful

esigndsc said...

This article is very nice. I got information to improve my blog traffic. Thank you very much. Digital Signature in Delhi